1. Press in the cover release latch and rotate up while sliding the cover the rear approximately one-half inch. 2. Lift the cover off and place to the side.
To remove the air baffle:
1. Remove the cover by pressing in the cover release latch and rotate up while sliding the cover the rear approximately one-half inch. 2. Lift the cover off and place to the side. 3. Grasp the air baffle using the finger guide. 4. Slightly, raise the rear end of the baffle and then lift it straight it out of the system.
二.空气挡板安装：
To install the air baffle:
1. Position the baffle in the system using the slot in the chassis as a guide. 2. Lower into position. Note: The movie above will give you a closer look at the slot in the chassis and the tab on the baffle.
To close Cover:
1. Position the cover over the chassis aligning the tabs in the cover with the slots in the chassis. 2. Slide the cover forward while rotating the cover release latch to the closed position. 对不起,您需要登录后才能查看全部详细内容
由深圳市七乘二四信息技术有限公司提供技术支持。
