1. Remove the cover by pressing in the cover release latch and rotate up while sliding the cover the rear approximately one-half inch. 2. Lift the cover off and place to the side. 3. Using a flat-bladed probe, flex the battery retaining spring clip to free the battery, and lift the battery out of the retainer.
二.电池安装：
To install the battery:
1. Position the battery under the battery retainer. 2. Close the cover by positioning the cover over the chassis aligning the tabs in the cover with the slots in the chassis. 3. Slide the cover forward while rotating the cover release latch to the closed position. Note: The movie above will give you a closer look at the slot in the chassis and the tab on the baffle.
由深圳市七乘二四信息技术有限公司提供技术支持。
