1. Remove the side cover. 2. Place the server in the service position. 3. Remove the support bracket by lifting the bracket up from the rear to a 45-degree position, and disengage the hinge tab at the front.
二.支撑支架安装：
To remove the side support bracket:
1. Hold the bracket at a 45-degree angle and engage the hinge tab at the front. 2. Lower the rear of the bracket and press it into place. 3. Return the server to its operational position. 4. Install the side cover.
由深圳市七乘二四信息技术有限公司提供技术支持。
