1. Remove the side cover. 2. Press the bezel release lever toward the front of the server. 3. Pull the top of the bezel away from the server and slide it towards the bottom of the server to remove it. 4. Here is a closer look at the bezel release lever.
二.挡板安装：
To install the bezel:
1. Insert the two tabs on the bottom of the bezel into the matching loops in the server chassis. 2. Push the top of the bezel toward the server until the two tabs at the top of the bezel lock into place. 3. Here is a closer look at the bottom loop on the chassis and the tab on the bezel. 4. Install the side cover.
由深圳市七乘二四信息技术有限公司提供技术支持。
